3mm infrared led , t-1 EAILP03RDAB4 features ? high reliability ? high radiant intensity ? peak wavelength p=940nm ? 2.54mm lead spacing ? low forward voltage ? this product itself will remain within rohs compliant version. ? compliance with eu reach ? compliance halogen free(br < 900ppm, cl < 900ppm, br+cl < 1500ppm) des cri ptions ?everlights infrared emitting diode ( EAILP03RDAB4) is a high intensity diode , molded in a blue plastic package. ?the device is spectrally matched with phototransistor , photodiode and infrared receiver module. ? free a ir transmission system ? infrared remote c ontrol uni ts with high power requirement ? smoke detector ? infrared applied system applications page 1 of 6 rev. 0.01
device selection guide led part no. chip lens color material EAILP03RDAB4 gaalas blue package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions 0.25mm datasheet EAILP03RDAB4 page 2 of 6 rev. 0.01
absolute maximum ratings (ta=25 ) parameter symbol rating units continuous forward current i f 100 ma peak forward current i fp 1.0 a reverse voltage v r 5 v operating temperature t opr -40 ~ +85 storage temperature t stg -40 ~ +85 soldering temperature t sol 260 power dissipation at(or below) 25 free air temperature p d 150 mw notes: *1:i fp conditions -- pulse width Q 100 s and duty Q 1%. * 2:soldering time Q 5 seconds. electro-optical c haracteristics (ta=25 ) parameter symbol condition min. typ. max. units radiant intensity ie i f =20 ma 7.8 12 17.6 mw/sr i f =100ma pulse w id th Q 100 s ,duty Q 1% -- 60 -- i f =1a pulse width Q 100 s ,duty Q 1%. -- 600 -- peak wavelength p i f =20ma -- 940 -- nm spectral bandwidth ? i f =20ma -- 45 -- nm forward voltage v f i f =20ma -- 1.2 1.5 v i f =100ma pulse w id th Q 100 s ,duty Q 1% -- 1.4 1.8 i f =1a pulse width Q 100 s ,duty Q 1%. -- 2.6 4.0 reverse current i r v r =5v -- -- 10 a view angle 2 1/2 i f =20ma -- 40 -- deg datasheet EAILP03RDAB4 page 3 of 6 rev. 0.01
0 100 -40 -20 0 20 40 60 80 20 40 60 100 80 120 140 0 20 40 60 80 100 i f =20ma ta=25 c rank condition i f =20ma unit mw/sr bin num ber m n min 7.8 11.0 max 12.5 17.6 note: *measurement uncertainty of forward voltage: 0.1v *measurement uncertainty of luminous intensity: 10% *measurement uncertainty of dominant wavelength 1.0nm typica l electro-optical characteristics curves fig.1 forward current vs. fig.2 spectral distribution ambient temperature datasheet EAILP03RDAB4 page 4 of 6 rev. 0.01
75 -25 0 25 50 100 900 920 940 960 980 0 10 10 1 10 2 3 10 4 1 2 3 4 -20 0.6 0.9 0.7 0.8 1.0 0.20.4 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 2010 0 10 0 10 1 10 10 2 3 10 4 10 100 1000 i f -forward current (ma ) ie-radiant intensity(mw/sr) fig.3 peak emission wavelength vs. fig.4 forward current vs. ambient temperature forward voltage typical electro-optical characteristics curves fig.5 relative intensity vs. forward current fig.6 relative radiant intensity vs. angular displacement datasheet EAILP03RDAB4 page 5 of 6 rev. 0.01
packing quantity specification 1.. 100 cs/1bag,4bag/1box 2.. 1 oxes/1carton label form specification cpn: customers production number p/n : production number qty: packing quantity cat: ranks hu e: p e a k w a ve length ref: reference lot no: lot number x: month reference: identify label number disclaimer 1. eve rlight reserves the right(s) on the adjustment of product material mix for the specification. 2. t he product meets everlight published specification for a period of twelve (12) months from date of shipment. 3. the graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. these specification sheets include materials protected under copyright of everlight. reproduction in any form is prohibited without obtaining everlights prior consent. 6. this product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. please contact authorized everlight sales agent for special application request. datasheet EAILP03RDAB4 page 6 of 6 rev. 0.01
|
